1100100010XN - ISO Mini-Cilinder - Metal Work
Â
Mini-cylinders - 1100100010XNÂ ISO 6432 with a chamfered stainless steel barrel.
The cylinder head dimensions have been reduced for some sizes so that they can be used where there are space restrictions.
Can be used with different types of sensors. Available in various versions with a wide range of accessories
                            • With or without magnet
                            • Single acting extended, retracted or through piston rod
                            • Double acting, single or through piston rod
                             • With pneumatic cushioning (Ø 16-20-25)
                            • Gaskets made of NBR, POLYURETHANE, and FKM/FPM (for high temperatures), and low-temperature gaskets
                             • Special executions on request
                             • Fixing accessories, guide units and mechanical rod locking
Â
| TECHNICAL DATA       1100100010XN            | Polyurethane | NBR | FKM/FPM | Low temperature     |
Max operating Pressure Bar: | 10 |
| MPa:Â | 1 |
| Temperature range °C | -10 to + 80 |  -10 to + 80 | - 10 to +150 (non-magnetic cylinders) | -35 to + 80 |
| Fluid | Unlubricated air. Lubrication, if used, must be continuous |
| Bores (mm) | 8,10,12,16,20,25 |
| Design | Camfered barrel |
| Standard strokes + (mm) | Single-acting: | For bores Ø8 tot 25 strokes from 1 to 50 |
|  | Double-acting | For bores Ø8 tot 10 strokes from 1 to 100 |
|  |  | For bores Ø12 tot 16 strokes from 1 to 200 |
|  |  | For bores Ø20 tot 25 strokes from 1 to 500 |
|  | Double acting, cushioned: | For bores Ø16 strokes from 1 to 300 |
|  |  | For bores Ø20 tot 25 strokes from 1 to 500 |
Versions
 | Double acting, double-acting cushioned, single-acting extended or retracted rod, through-rod, through-rod cushioned, Version with psition rod block, no stick slip |
| Magnet for sensors | All versions come complete with magnet. Supplied without magnet on request. |
| Single piston rod | Ø8 | Ø10 | Ø12 | Ø16 | Ø20 |        Ø25          |
| Single piston rod Bar | 0.8 | 0.8 | 0.8 | 0.6Â | 0.6 | Â Â Â Â Â Â Â 0.6Â Â Â Â Â Â Â Â Â Â Â Â |
| Through-rod Bar | 1 | 1 | 1 | 0.8 |  0.8 | 0.8    , |
| Â | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
Notes
 |  For speed lower than 0,2 m/s to prevent surgung, use the version No stick-slip and non-lucbricated air.  + recommended strokes. higher values can create problems |
Metal Work - 1100100010XN
